Caldigit HDPro Manual do Utilizador

Getting Started

10 B. Installing DrivesMac7. When all the drives have been populated, check they are all ush, then use the thumbscrews to close the rear door.

11C. Installing the PCI cardMacC. Installing the PCI card 1. Turn off your computer and unplug the AC powercord from the wall or power bar.

12 C. Installing the PCI cardMac2. Remove the cover from your computer. 3. Locate an available PCI-E / PCI-X slot on the motherboard.

13C. Installing the PCI cardMac4. Always put the PCI card in Slot #3 or Slot #4 to obtain the optimal performance.PLEASE NOTE:If you have a MacPro Dua

14 C. Installing the PCI cardMacPCI card + AJA: CalDigit PCI card should be placed in slot #4 and AJA card should be placed in slot #3.

15C. Installing the PCI cardMacPCI card + Blackmagic Design: CalDigit PCI card should be placed in slot #3 and Blackmagic Design card should be placed

16 C. Installing the PCI cardMac5. Hold the PCI-E / PCI-X card rmly by the outside edge, push it into the slot, making sure the PCI connections t ou

17C. Installing the PCI cardMac6. Attach the PCI Express Cable from the tower PCI connection to your HDPro.

18 D. Installing RAID ShieldMacD. Installing RAID Shield1. Press the power switch to turn on the HDPro. It is important to remember that the HDPro sho

19D. Installing RAID ShieldMac5. Your drive will appear on your desktop.All HDPro’s are precon gured in RAID 5 with Mac drive format.Congratulations!

Apple, Apple Logo, Mac, the Mac logo, FinalCut Pro, Macintosh, are trademarks of Apple Computer Inc. Microsoft, Windows and Windows Logos are register

20 E. Using RAID ShieldMacE. Using RAID Shield1. Go to Applications / RAID Shield. Double-click "RAID Shield".2. Click "Scan Controller

21E. Using RAID ShieldMacThe RAID Shield utility is a quick and easy way to check on the status of your HDPro but is not necessary for day to day use.

Mac22F. Shutting down the computerWhen you want to shut down your HDPro, please turn off your computer; wait 20 seconds then hold the power button for

for Windows

24 A. Quick checkWindowsA. Quick CheckAfter opening the box please examine all included materials. Your HDPro should consist of:•HDPro Unit x 1 •PCI-E

Windows25B. Installing DrivesB. Installing Drives1. First pop open the drive locking arms by pushing the included key into the drive tray key slot, as

Windows26 B. Installing Drives2. Take note of the number on each drive.

Windows27B. Installing Drives3. Open the back of the HDPro using the thumbscrewson the right side of the back door.

Windows28 B. Installing Drives4. According to the above mentioned drive number (step 2), start sliding the drives into the unit, starting at the top (

Windows29B. Installing Drives6. Top to bottom, use the same procedure to insert the remaining drives with drive number A0 being top, number A1 second

for Mac

Windows30 B. Installing Drives7. When all the drives have been populated, check they are all ush, then use the thumbscrews to close the rear door.

Windows31C. Installing the PCI cardC. Installing the PCI card 1. Turn off your computer and unplug the AC power cord from the wall or power bar.

Windows32 C. Installing the PCI card2. Remove the cover of your computer. Hold the PCI-E / PCI-X card rmly by the outside edge, push it into the slot

Windows33C. Installing the PCI card3. Attach the PCI Express Cable from the tower PCI connection to your HDPro.

Windows34 D. Installing RAID ShieldD. Installing RAID Shield1. Press the power switch to turn on the HDPro. It is important to remember that the HDPro

Windows35E. Launch RAID ShieldE. Launch RAID Shield 1. Launch the RAID Shield from: Programs / CalDigit / RAID Shield Client.2. Click "Scan Contr

Windows36 E. Launch RAID Shield3. Delete Array by selecting the array, check "con rm delete" then click "delete".Every time you &

Windows37E. Launch RAID Shield4. Create Array - RAID 5, Stripe Size 256KB, Sector Size 4096 bytes*, Select all drives, "On the y initialization&

Windows38 E. Launch RAID ShieldKeep in mind, that on the  y initialization will take from  ve to eight hours, depending on the size of your array. D

Windows39F. Shutting down the computerWhen you want to shut down your HDPro, please turn off your computer; wait 20 seconds then hold the power button

4 A. Quick checkMacA. Quick CheckAfter opening the box please examine all included materials. Your HDPro should consist of:•HDPro Unit x 1 •PCI-E or P

www.caldigit.com ©Copyright 2008 CalDigit, Inc. All Rights Reserved

5B. Installing DrivesMacB. Installing Drives1. First pop open the drive locking arms by pushing the included key into the drive tray key slot, as show

6 B. Installing DrivesMac2. Take note of the number on each drive.

7B. Installing DrivesMac3. Open the back of the HDPro using the thumbscrewson the right side of the back door.

8 B. Installing DrivesMac4. According to the above mentioned drive number (step 2), start sliding the drives into the unit, starting at the top (drive

9B. Installing DrivesMac6. Top to bottom, use the same procedure to insert the remaining drives with drive number A0 being at the top, number A1 secon